Steel erection, rooftop HVAC placement, precast vaults, tandem lifts, tight-access picks and permitted heavy haul across the Fraser Valley and Lower Mainland. If your job looks like one of these, it is the kind of call we want.
20 projects
Picker truck setting structural steel beams and columns on a commercial build, flying members off the deck and into position so the steel crew could bolt up without waiting on a second crane.
Hoisting rooftop HVAC and air conditioning units over the building edge and landing them on curbs, including removal of the old unit on the same setup so the mechanical crew finished in one visit.
Reaching from street level over shoring into a deep excavation to lower pipe, forms, pumps and bins, and pull them back out, without tracking equipment down into the hole.
Extracting a Genie lift from inside a building at the fifth and sixth floor level through a window opening, working in a tight downtown street with a controlled swing path.
Two picker trucks rigged in tandem to lift a load beyond the capacity or balance of a single crane, with a shared lift plan, matched boom travel and spotters on both units.
Setting precast concrete vaults, chambers and lids into prepared excavations for utility and civil work, hauled in on our own deck and placed on the same trip.
Transporting heavy precast vaults and concrete structures from the yard or plant to site on tri-drive picker trucks, so one unit both delivers and offloads the piece.
Standing and replacing street light standards, sign posts and poles at roadside locations, working with a short footprint so the lane closure and traffic control window stays small.
Offloading a large cable reel with a spreader bar and engineered rigging, keeping the reel level and its flanges undamaged through the pick and set-down.
Hauling multiple cable and wire reels for utility and electrical contractors, secured upright on the deck and offloaded by the truck's own crane at each drop.
Delivering and setting circuit breakers and electrical apparatus inside a substation yard, working to utility clearance requirements with controlled, slow-speed placement.
Working in an alley between two buildings where a conventional crane could not set up, a knuckle boom folded through the gap and placed the load with inches of clearance.
Landing bundled roofing material, membrane rolls and insulation on the roof deck in staged picks, so roofers work from the deck instead of carrying material up.
Relocating shop machinery inside and out of an industrial building, rigged, skated, loaded and reset at the new location on a schedule that kept production downtime short.
Day-rate and hourly hydraulic crane service for contractors who need a picker, an operator and a deck on site: general lifting, unloading and set work with one call to dispatch.
Moving excavators, loaders and heavy equipment on low bed and double drop trailers, with a picker on site to offload attachments and components that cannot be driven off.
Permitted heavy haul runs through the Fraser Valley and Lower Mainland, with route planning, permits and pilot cars arranged with the load, so the piece arrives ready to set.
Wide, tall and over-length freight, from precast panels and tanks to steel and modular sections, hauled with the right deck, securement and permits for the dimensions.
Hauling aluminium and steel coil and bulk metal product with coil-specific securement, delivered into mills, fabricators and warehouses on schedule.
Running precast concrete products, barriers and blocks between plants, yards and job sites, with self-offloading pickers where no site crane is available.
Tell dispatch what you are lifting or moving and where it has to go, and we will confirm the right unit, access plan and timing.
